December 6th, 2017
MRT 2113 version, version: 2.1.1.3
– This update is chargeable
– Add SSD utility (Beta)

Seagate F3, upgrade to: 2.0.1.7
– Add ROM reading and writing in LT,LM series
– Add firmware unlock of LT,LM series in the family ID of 5F,87,8C,A5
– Add firmware unlock of NM series in the family ID of 91
– Add virtual boot of family with ID 4F
– Add arbitrary head cut for 1CH series of 14 generation
– Add the support of loading LDR via serial port
– Add the support of modifying model for most HDDs
– Add head adaption of family with ID 72
– Support high baud rate when reading/writing ROM of family with ID 4F,55,59,76,7A,86,91,A5
– Add family panel (91,7A,A5)
– Add manually modify configuration file when reading/writing ROM under BootCode (In the MRT installation directory, the file name is SGT-F3GBootCodeBRF.ini)
– Optimize creating LDR incomplete issue of family with ID 56
– Add firmware unlock of family with ID 0x7A
– Rebuild head cut method of 1CH family
– Fix 03 module parsing problem of several HDDs
– Fix check error of firmware unlock mode I
– Fix the LED error during head cut of part 1CH disks (updated on 6th,December)

Toshiba, upgrade to: 2.0.3.7
– Add family of HDWJ1 MQ01UBD

DE, upgrade to: 2.3.2.2
– Add HFS+ file system parsing, based on GPT and DOS partitions (Apple file system)
– Add function of creating compressed bitmap during data image (Range File)
– Add saving bad files separately and automaticaly
– Add support of mounting and file parsing of disk with capacity larger than 2TB
– Support mounting source disk with capaciity larger than 2TB
– Optimize GPT partition expansion function
– Optimize NTFS system parsing
– Add support to target disk of VHD type
– Add version number of DE task file
– Update MRT VIRTUAL driver, optimize driver transfer speed of disk with capacity larger than 2T
– Optimize HFS+ system based on GPT partition
– Optimize creating task file
– Optimize create head map function

WD utility, upgrade to: 2.2.5.5
– Add support for 1945, 1590, 1552 and other series in Boot ROM mode
– Optimize automatic detection error bug of few families in initialize self test environment function
– Add self-test extended tool for users familiar with self-test, can choose random combination process to do self-test

Samsung utility, upgrade to: 2.0.0.2
– Add default module list for all series; Optimize access to module list; fix an issue that T166(S) series family module list fails to be acquired
– Add support for M7E,M8E family in write burn resource function
– Add the function of search burn resources in write burn resource, can search according to model, firmware version, Part Number (this data is showed in start process), optimization function panel
– Add the function of using serial port to download resources (showed in resources download panel)
– Add the function of using serial port to write ROM (showed in ROM panel)
– Add “Start Burn-In test” function and “Continue Burn-In test” function of M7E family

Database, upgrade to: 1.0.1.7
– Solve the issue of database import failure caused by language code in multi-language system environment

SSD repair utility, version: 1.0.0.0 (Beta version)
– This tool is the initial version
– Include Samsung SSD utility, support Samsung 850,840,830 series.
– Include Intel 510 utility, support Intel 510 series.
– Include Marvell Controller utility, support SSD with Marvell Controller, such as Intel 320,710 series,etc.