MRT 2130 version, version number: 2.1.3.0
1. Optimize main program notification function, the prompt will appear in the lower right corner and allow users to cancel the notification message.
2. Add full support for new MRT USB terminal , which can automatically detect and set the terminal voltage (need to upgrade to new terminal)
3. This upgrade is charged

Western Digital Utility: 2.2.7.0
1. Support for the new Marvell 88i10XX and LSI TT67XX controllers has been added to the Boot-ROM mode;
2. The data transfer speed has been increased in the Boot-ROM mode. Both loader and Upper program have been optimized
3. 1961 (WD10JMVW) has been added into support list of USB decryption
4. Add a new family: Apollo
5. Re-program the RAM Headmap Editing function, in which the HDD with board ver.800022 has been added, which meanwhile enhances its compatibility with some drives previously not well supported
6. Enhance and optimize the HDD ID Editing function, add editing options for three major categories: Features, SED, SMART features
7. Enhance Clear SMART function, add two more ways to clear SMART
8. Enhance and optimize LDR uploading
1) Add the option of uploading module 01 to HDD RAM while updating SPT option
2) Add the option of uploading module 02 to HDD RAM while fixing slow response issue
3) Add one key solution which automatically uploads all microcode module once and for all.
4) Modeless Dialog is now available in this session
9. Re-program the function of Creating LDR File to solve compatibility issue with some drives previously not well supported
10. Re-program the function of Loading Module List from HDD, which is now renamed as Loading module 01 into HDD RAM. In addition to the modification above, three more options have been added in this session: Uploading LDR;Uploading module 02 into HDD RAM;Enable the Access to Service Area in RAM
11. The function of Disabling Access to Service Area has been optimized which now would disable the service area access of all heads
12.The tips of 02/411/30 being disabled has been added in Bootup process
13. The tips of service area access being disabled has been added in Bootup process
14. The Voltage Setting for newly released com-port device has been added
15. ROM Headmap Editing function has been optimized
16. The working mechanism of Editing ABA Range has been optimized where the tips of service area access being disabled or enabled has been added

DE Utility, version: 2.3.4.4
1. .FNM and .QFNM are added to the task file.
2. Fix the problem that “Marking Effective Partition” feature would possibly crashes under certain circumstances

Seagate F3 Utility, version: 2.0.3.3
1. The solution for repairing Rosewood(LM) sector access interruption has been added,which requires the assistance of Virtual Start(Original Firmware is needed)
2. The solution for repairing Rosewood(LM) sector access interruption without backup has been added,which currently cannot be applied to the HDD with 3 heads
3. Add virtual start family:0x63(NM0053),0x91(NM0055,VX0023),0x72(LM000, LM024),0x9B(DM004,DM005),0xA0(VX000,DM004),0xAD(DM008)
4. Newly added family: 0xA0,0xAD
5. Add terminal voltage adaptation
6. Add 3M, 6M baud rate
7. Add the function to delete Firmware Unlock Code in ROM Tools(Only applicable for the patch made in and after ver. 2.1.3.x)
8. Add the function to delete Virtual Start Code in ROM Tools(Only applicable for the patch made in and after ver. 2.1.3.x)
9. Modify the system file size to be displayed by sector
10. Optimize ABA Read/Write mechanism for system file
11. Optimize the backup scheme to ensure files obtained from copy1 would not overwrite the files from Copy0
12. Optimize the way status information displays in the Hex editor
13. Optimize the print information of automatic adaption

Samaung Utility: 2.2.0.0
1. Optimize the startup process and increase the startup speed
2. Editing headmap has been optimized to acquire better compatibility with old HDD(T166S, M40S, M60S, M80S, etc.). The failure of obtaining module 9D has been fixed
3. HDD Initialization with Headmap Editing has been optimized to acquire better compatibility with the old drives (T166S, M40S, M60S, M80S, etc.)
4. View Rom Information has been optimized to have better compatibility with the old drives (T166S, M40S, M60S, M80S, etc.)
5. Fix the issue that Quick Start Last Task only supports a part of functions in the menu(such as “View Rom Information”), and most menu items are now supported.
6. Optimize the functions such as “View Module”, “Backup Module”, “Backup Track”, “Batch Write Track”, “Batch Write Module”, “Hard Disk Resource View Edit” to display all the heads when operating
7. Add verification when Read/Write ROM
8. Optimize the utility to ensure HDD will not turn bsy or fail to obtain module list when trying to get module list after the ROM has been written into HDD.
9. Optimize ROM data source dialog,three options are now available: database, file, hard disk
10. Add the function of Automatic ROM Save which enables a part of ROM reading relevant task to automatically save a ROM file to the working directory under the folder of AutoSave
11. Optimize the utility to ensure entering Debug mode forcibly upon failure (which may cause the hard disk to be unstable)
12. Optimize the utility to ensure T166S family to obtain correct S defect list
13. The voltage setting for newly released com-port device has been added
14. Add new supported model: HD753LI, HD322HI, HD252HJ