August 23rd, 2019
MRT 2131 version，version number：2.1.3.1
This version adds SSD utility and the activation of SSD utility will cost user another fee.
About upgrade log please refer to the SSD section of 2.1.4.0 version.
August 25th, 2019
MRT 2140 version，version number：2.1.4.0
The activation of SSD utility will cost user another fee.
1. Interface icons have been redesigned
2. Layout of interface has been optimized
3. Sleep and Awake button have been added in the main interface
SGT: Utility Version 2.0.4.0
1. Adds a double progress bar
2. Adds a com port switch button on family interface
3. RAM initialization info will be displayed in the log
4. RAM update has been added in Basic Status
5. Edit ID has been added in RAM operation
6. Adds the display of baud rate
7. Adds automatic sequence of system files
8. Support for head map of HDD with more than 10 heads
9. Support for sending multiple commands with one key （refurbishment）
10. Support for head shield of new families(ID:0x59 6 heads) (refurbishment)
11. Offers the possibility to add defects in the form of LBA into P list(8 categories)(refurbishment)
12. Adds removing diagnostic lock of 0x63（ST1000NM0033）、0x70(ST4000DM000-1F2168)(only works in RAM)
13. Support for backup of system files in batch
14. Adds descriptions of system files(descriptions for vital modules and sys files)
15. Support for editing SMART parameter(refurbishment)
16. Adds family 0xAF (brand new family)
17. Support for ROM operation of LM035-EB01
18. Support for firmware unlock and virtual start of LM035-EB01
19. Important update：a special firmware designed for SBM3 and SDM1
l Minimized system that offers solution for power-on LED issue
l Embedded Overlay that offers solution for overlay not able to be loaded or refreshed
20. Adaptation parameter can be written into RAM(refurbishment)
21. Optimizes the compatibility of Password Remove
22. Optimizes the function lab of serial port(for improving user experience)
23. Optimizes the algorithm of head adaptation program
24. Optimizes the switch between different R/W modes(adds new shortcut buttons)
25. After headmap creation, Seagate utility will automatically switch to ATA mode
26. Optimizes the convenience of Read/Write operation of sys files
27. Fixes the error that software reports ROM Has Already Been Patched when trying to unlock or use virtual start for some HDD belonging to family 8C and A5
28. Fixes the error that it may fail to obtain headmap in RAM(Family ID:0x58)
29. Optimizes the process of obtaining family ID
30. Fixes the possible software corruption when adding defects into P-list
31. Fixes wrong identification between LM drive and non-LM drive in automatic translator regeneration
32. Bootcode mode has been integrated into RAM Tool and ROM Tool
WD: Utility Version 2.2.8.0
1. Adds new family Spyglass（800041）,Plamer（800066），Charger
2. Optimizes the module 01 analysis to avoid disorder of ABA address (800041,800066.etc)
3. Support for headmap creation of HDDs with PCB ver.800041,8000066
4. Support for editing headmap in RAM for HDDs with PCB ver.800041, 800055, 800066
5. Enhances Slow Start Fix
6. Adds a new feature for fixing quick failure when scanning drives
7. Adds a new diagnostic mode which has a better compatibility with more drives and also provides auto-test
8. Adds a detection of whether SA translator is loaded during boot-up process
9. Adds one key button for selecting all heads in head test
10. Adds a prompt when Resource Backup attempts to overwrite files already existed
11. After SA structure test, software will display the test method(ABA,track or ID)
12. Optimizes USB decryption process
13. Optimizes the module list
(1) Module list is now able to display all the copies of modules simultaneously
(2) Disable Backup Tool button when ByID or ByMem is selected
(3) Module list won’t refresh when switching between different R/W modes
(4) Buttons for Read/Write mode have been moved into module list page
14. Modules will be automatic sequenced according to ID
15. Optimizes the level of file path, making it more simplified and well categorized for convenience
16. Optimizes the conversion between ABA and CHS address
17. Optimizes the function logic of SA Module Search which could now auto-skip bad sector;Enhances the rebuild of 01 module(moved to the right-click menu in module search dialog)
18. USB data decryption renamed as SED Status Switch
19. Optimizes the mechanism of automatic obtaining HDD ID
20. Reconstruct the infrastructural interface of serial port(support for new serial device)
21. Menu has been redeployed and classified so as to make it more convenient to use the program
22. Module offset has been redesigned and is now able to shield bad sectors automatically
23. Resource Viewer has been redesigned to support for multiple tasks
24. Mrt Hex has been optimized which could now be applied to various task environments
Hitachi ARM: Utility Version 2.0.2.10
1. Adds family 7210A9
SAMSUNG: Utility Version 2.3.0.0
1. Adds Head Test
2. Adds SA Test which offers a series of test combinations
3. Adds importance mark for each module
4. Adds a prompt when resources are to be overwritten
5. Adds View BURN Report
6. Adds Set features
7. Optimizes the process of A-list to S-list
8. Optimizes S-list Rebuild
9. Optimizes Zone Edit
10. Optimizes the prompt of log info
11. Optimizes the layout of functions
12. Optimizes Write Burn Resources, adds resources auto-select
13. Fixes some bugs in relation to Edit Defect List
DE: Utility Version 2.3.5.0:
1. Support for UFS file system
2. Support for VMFS file system
3. Adds a diagnostic mode for DE(file explorer mode)
4. Support for manually editing MFT parameter
5. Support for editing file parse node
6. Support for diagnosis of MFT
7. Support for MFT stream scanning and file index format
8. MFT scanning has been redesigned
9. Optimizes the mechanism of saving bad files
VR(Data Recovery for Video Recorder): Utility Version 1.0.0.0:
1. Support for clone of Hikvision video
2. Support for viewing files of Hikvision video
3. Support for file stream scanning of Hikvision video
SSD:
Silicon Motion: Utility Version 1.1.3.0:
1. SM2246XT
(1) Support for Silicon Power Slim S55
(2) Support for Silicon Power Slim S60
(3) Support for CFast Lexar Professional 3400x
(4) Support for uploading LDR for SM2246XT
(5) Support for creating virtual translator for SM2246XT
2. SM2246EN
(1) Support for Crucial Bx100
(2) Support for PlextorM6V
(3) Support for PNYCS1111
(4) Support for Corsair Force LX
(5) Support for RevuAhn 900T PRO
(6) Support for RevuAhn 880K
(7) Support for RevuAhn 850X
(8) Support for uploading LDR for SM2246EN
(9) Support for creating virtual translator for SM2246EN
3. SM2256K
(1) Support for ADATA SP550
(2) Support for AMD Radeon R3
(3) Support for uploading LDR for SM2256K
(4) Support for creating virtual translator for SM2256K
4. SM2258(G,H)
(1) Support for ADATA SU800
(2) Support for Plextor S2C
(3) Support for uploading LDR for SM2258(G,H)
(4) Support for creating virtual translator for SM2258(G,H)
5. For supported Silicon Motion drives,the functions listed below are available:
(1) Support for Chip Info View
(2) Support for Password checking
(3) Support for Check SSD status, such as the working mode of Firmware
(4) Support for displaying SSD status info in bootup log,such as the quantity of channel,chip,logical unit,block,page and chip ID,SSD capacity
(5) Support for searching and reading of each CP
Phison PS3111 : Utility Version 1.0.0.0:
(1) Adds information log
(2) Adds program initialization
(3) Adds Read/Write of CP
(4) Support for creating virtual translator